READ BEFORE INSTALLATION – Any persons assembling these products (contract installers, employees and other personnel) must provide this product guide to those persons, store manager, site or maintenance supervisor etc. Read the instructions thoroughly before assembly, all product questions can be directed to VIP Customer Service, (888) 521-0328 Office hours are M-F 9am -6pm PST.
Refer to VIP Crowd Control order catalog for item part numbers, materials and color selections.
Refer to catalog for available color selection & type Taper Top version shown in diagram
Applies only to Crown & Taper models
Required tools, Phillips head screw driver (Size #2) and an adjustable crescent wrench:
Assemble the Wedge - item 5 into the Wedge Base - item 4 and insert into the tube ends. Use the Wedge assembly screws to engage the Wedge into the Wedge Base.
Align the Base Cover with the Base and assemble the washer, lock washer and bolt into the Wedge Base assembly mounted inside the base of the tube through the Base Cover and Base.
Tighten the bolt until the assembly is stiff and firmly joined. Do not over tighten.
Assemble the Post Rope Ring the Post Top, the Top Extension then screw the assembly into the Wedge and Wedge Base assembly located in the top end of the Post Tube.
Tighten the bolt using the adjustable crescent wrench until the assembly is stiff and firmly joined. Do not over tighten.