|
| |
Stanchion Assembly
|
| READ BEFORE INSTALLATION – Any persons assembling these products (contract installers, employees and other personnel) must provide this product guide to those persons, store manager, site or maintenance supervisor etc. Read the instructions thoroughly before assembly, all product questions can be directed to VIP Customer Service, (888) 521-0328 Office hours are M-F 9am -6pm PST. |
| |
| ITEMS |
| |
 |
 Refer to VIP Crowd Control order catalog for item part numbers, materials and color selections. |
| |
| ASSEMBLY |
| |
| Required tools, Phillips head screw driver (Size #2) and an adjustable crescent wrench: |
- Insert Head cassette into the post tube as shown and tighten 4 bottom assembly screws (Do not remove these screws from the head cassette prior to assembly, slightly loosen them before inserting head cassette into the tube).
- Snap Wedge - item 10 into Wedge Base - item 9 and insert assembly into the bottom of the post tube.
- Tighten the 2 Phillips head screws on the Wedge Base to engage the Wedge assembly within the post tube.
- Align the Base Cover with the Base and assemble the washer, lock washer and bolt into the Wedge Base assembly mounted inside the Base of the tube through the Base Cover and Base.
- Tighten the bolt using the adjustable crescent wrench until the assembly is stiff and firmly joined. Do not over tighten.
|
| |
| BASIC CLEANING INSTRUCTIONS |
| |
| Occasional cleaning of the post and base cover with a mild household cleaning product is recommended. Do not use any cleaner containing alcohol or ammonia. Sanitizer should also be considered pending the install location. |
| |
| Belt End Locks for Stanchion Products |
| |
 |
All VIP belted stanchion products are supplied with a belt end lock. This product feature can be found on the end of the belt. |
| |
| After the belt has been extended, secure the belt end by simply turning the lock away - as shown in the example. The function of the belt end lock is designed to secure the belt end to another stanchion or wall mount. |
| |
| Then test to check if the lock is secure by trying to lift up the belt end from the mounted position, it should feel snug when trying to pull up. |
| |
| Lock all belts after extending the belts into place. |
| |
| If the belts lock fails contact VIP for an immediate replacement. |
|
